Plier round nose

Plier tweezernose

Degree Protractor Premium Quality

Mini clamp on stick

Cleaning sticks Ideal for cleaning airbrusch Package contains 10 pcs.

Mini collet holder with 3 collets For example to hold small dills in bigger drill chucks 3 Collets: 0-0.8MM 0.8-1.5MM 1.5-2.5MM

Hand drill / vice For drills from 0.3 - 1.0mm

Hand vice with wing nut 130 mm Flat clamp 11mm wide. For clamping small objects

Brass tubes - Set 4 Slide Fit Tubes can slide into each other telescope effect. 1x 1.1mmx200mm 1x 1.6mmx200mm 1x 2.1mmx200mm 1x 2.6mmx200mm

Brass tubes - Set 3 2x 1.1mm x 200mm 2x 1.2mm x 200mm 2x 1.3mm x 200mm 2x 1.4mm x 200mm

Xuron Angled head sprue cutter Suitable for cutting plastic parts from sprues and soft metal wire up to 0.6mm. The thin 55 degree angled head provides easy access and ensures a precise cut. Made in USA

Drill Set 0.30 - 1.60mm - HSS - titanium Titanium coated. Better for drilling metals, last longer. 20 HSS drills in sizes: 0.30-0.35-0.40-0.45-0.50-0.55-0.60-0.65-0.70-0.75-0.80-0.85-0.90-0.95-1.00-1.20-1.30-1.40-1.50-1.60 Packed in plastic...

Hammer Rubber/Steel Hammer with rubber and steel head

Double hand drill / vice Length: ca. 9cm For drills from 0.3 - 2.4 mm with 2 double collets (=4 different sizes) with 2 double collets (=4 different sizes)

scraper/knife with handle

Colle 21 - Primer 21 Can be used as a base layer for difficult to bond plastics such as PE, PP, PTFE, Glass, Plexyglass, polystyrene. Use Primer21 prior to gluing with Cyanoacrylate glue, Super Glue, or Colle21. Apply a thin layer of primer21 to the part

Center finder Dimensions 80x50mm For locating the center of round and square shapes. For example, the center of a bar stock

Photo Etch Pencil Has a slightly sticky tip, to pick and place small parts without shooting away. If the tip is not sticky or sharp anymore it can be scharpened with a regular pencil sharpener.

Colle 21 anaerobic cyanoacrylate glue - GEL- 3 Gram Ideal for porous maerials COLLE 21 is an ANAEROBIC glue, It works with pressure, which gives you the time to correctly position your assemblies. Assembly without the pressure of 2 surfaces. The pressure

Third hand base with magnifier 90mm For precision work for wich you'll need both hands and could use 1 extra. Very usable for soldering With (glas)magnifier ca. 90 mm, magifies 2x Completely adjustable.

Scalpel handle no.3 - ergonomic handle The ergonomic handle provides more comfort and stability. (without blade)

Japan spatula set, 4 pieces, plastic Set with 4 flat spatulas with the widths 5cm, 8cm, 10cm, 12cm.

Saw and grinding disc holder with wide head Shaft thickness: 2.3mm (Standard size fits most machines such as Proxxon, dremel, etc.) Screw thicknes 1.7 mm With 8mm wide head for extra support of the saw blade / grinding disc

18-piece grinding disc set. Resin bonded aluminum oxide discs for grinding, cutting and deburring. Can be used on metal, alloys, plastic, fiberglass and wood. To be used with Proxxon, Dremel and other grinder machines. Cutting disk is 0,6mm strong Content