Dust brush 15mm

Colle 21 anaerobic cyanoacrylate glue - GEL- 3 Gram Ideal for porous maerials COLLE 21 is an ANAEROBIC glue, It works with pressure, which gives you the time to correctly position your assemblies. Assembly without the pressure of 2 surfaces. The pressure

Mini scissors curved

Needle files set 100mm mini Diamond- 5pcs.

Colle 21 - Primer 21 Can be used as a base layer for difficult to bond plastics such as PE, PP, PTFE, Glass, Plexyglass, polystyrene. Use Primer21 prior to gluing with Cyanoacrylate glue, Super Glue, or Colle21. Apply a thin layer of primer21 to the part

Japan spatula set, 4 pieces, plastic Set with 4 flat spatulas with the widths 5cm, 8cm, 10cm, 12cm.

Center finder Dimensions 80x50mm For locating the center of round and square shapes. For example, the center of a bar stock

18-piece grinding disc set. Resin bonded aluminum oxide discs for grinding, cutting and deburring. Can be used on metal, alloys, plastic, fiberglass and wood. To be used with Proxxon, Dremel and other grinder machines. Cutting disk is 0,6mm strong Content

Solder tin wire - 0.6 mm, 100 gram 60/40 Rosin Core 100 gram

Tap Wrench Mini Square: 2,1-6,0mm Length approx. 11 cm

Center Punch Set 1/32 Inch 1/16 Inch 3/32 Inch

Third hand base with magnifier 90mm For precision work for wich you'll need both hands and could use 1 extra. Very usable for soldering With (glas)magnifier ca. 90 mm, magifies 2x Completely adjustable.

Hand drill with spring Chrome For drills from 0.3-1,0mm

Cross Tweezer straight narrow Tips - Stainless Steel Selfholding Tweezer. Hols small objects by itself With straight narrow Tips under small angle Material: Stainless Steel Premium Quality

Brass Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Diamond reamer / file set - 4 pcs: • Diamond coated points - 150 grid • Plastic handle, Handle length: 7cm • Assorted colors • Used for filing, grinding and shaping beads made of ceramic, plastic, glass, tile, gold, stone, metal, carbide, wood, etc. • Id

Lomer Nr.4 11x6,5cm Used for clay cutting, smoothing, contouring and pattern decoration. Can be used both as a hand shaping and turning tool. Available in 5 versions

Modelling Wax Hard Extremeley low oil concentration (making gluing and painting no problem). Ideal for easy filling of seams and holes in scalemodels and figures of various materials such as plastic, resin metal, etc. Hard variant - Suitable for small an

Bench hook with miter box The raised edge can be used as a stop for a workpiece. In the raised edges, 2 mini miter boxes are incorporated, these can be used with the middle and largest saw blade https://www.marks-miniatures.com/en/handsaw.html Material:

spring clamp Maximum opening: 35 mm The clamp opens by squeezing. When released, the clamp closes automatically. Suitable for clamping different shapes. (round, square, triangle etc,)

Needle nose pliers straight fine

Cross Tweezer straight on stand - heat resistant Selfholding Tweezer. Hols small objects by itself

Hammer Rubber/Steel Hammer with rubber and steel head

Ruler - metal Scale: mm and inch Reach: 15,5 cm / 6 inch