Diamond Burs  cylinder round - 20 pcs. 5 x Ø 1.5 mm 5x Ø 2,0 mm 3 x Ø 2.5 mm 3 x Ø 3.0 mm 2 x Ø 3.5 mm 1.x Ø 4,5 mm 1 x Ø 5.0 mm Base thicknes 2,35mm Ideal for Proxxon, Dremel and comparable machines.

Soldering Station 48 Watt, 160-480? Changeable Bit

Mini Compressor Single piston oil-free Mini Compressor. Without air reservoir (pressure vessel), the regulator of the output pressure, which is equipped with the filter and pressure gauge (manometer) Low volume during operation, can be used also in the e

Mini saw set Set consists of a handle with 3 saw blades. Suitable for plastic and wood Note: saw blades are not available separately!

Diamond Burs + diamond disks - 25 parts 18 Diamond Burs 5 diamond disks (metal) 2 Holders Base thicknes 3mm Ideal for Proxxon, Demel and comparable machines.

Mini nutdriver set 3.0 / 3.5 / 4.0 / 4.5 / 5.0mm

Pressure regulator and moisture separator for compressor The gauge indicates the operating pressure of the airbrush. To adjust the pressure, pull the knob upwards, then it can be turned. Turn clockwise to increase pressure; turn counterclockwise to decrea

Mini open end- and ring spanner set 3.2mm / 4mm / 5mm / 5.5mm / 6mm / 7mm / 8mm / 9mm /10mm Thin version, 1.6mm thick.

Diamond tapered file set #120, #180, #300, #400 with Handle • 12-piece tapered diamond file set includes: - Grit 120: 6 mm, 4 mm, 2 mm flat file - Grit 180: 6 mm, 4 mm, 2 mm flat file - Grit 300: 6 mm, 4 mm, 2 mm flat file - Grit 400: 6 mm, 4 mm, 2 mm f

Glass fibre cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Mini vise Jaw width 40mm Maximum opening: 30 mm Can be mounted on the table with the screw holes.

Miter sanding aid - angle sanding The angle can be adjusted. The handpiece has a slide (stop). Comes with a set of 3 extra sanding belts: 150 Grid 240 Grid 320 Grid Sanding belt set is also available separately. Ideal for profiles in styrene, wood and me

LED DESK LAMP WITH MAGNIFYING GLASS - DAYLIGHT - 5 DIOPTRE- 4 W - 48 LEDS - WHITE This magnifying lamp is an aid for all kinds of precision applications at home as well as at work. It comes with a 5-dioptre lens (magnification 2.25 x). A well-balanced, u

Fretsaw Fretsaw to be used to saw wood profiles, plastic and fine metals.

Double hand drill / vice - US Model Length: ca. 9cm For drills from 0.3 - 3.0 mm with 2 double collets (=4 different sizes)

Brass tubes - Set 1 2x 0.3mm x 200mm 2x 0.4mm x 200mm 2x 0.5mm x 200mm 2x 0.6mm x 200mm

Nail press 2mm / 3mm A nail press is the solution if you need to hammer small nails and nails into a delicate surface. Or if it is dangerous to use a hammer. The nail press has a magnetic head that holds the nail in place. Make your choice: Blue - for nai

Airbrush holder benchtop max. 4 airbrush Excellent container for four Airbrush spray guns. The holder of the upper part is rotated 360 °, and has two different systems for the storage of airbrushes. The container is suitable for all guns. The base of th

Cutting Mat din A1 (900x600mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Mini Anvil Double horn anvil for precision work. Excellent quality. hardened. Widely used by watchmakers, jewelers and hobbyists.

Sandpaper file 3 Variants: 120 Grid 180 Grid 240 Grid Single sanding belts also available

Cutting Mat din A2 (600x450mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Cutting Mat din A3 (450x300mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Extra long mini Drill Set 0.5/0.7/1.0/1.5/2.5mm Approx. 100 mm long