Needle files set 100mm mini - 12 pcs. Files are 100 mm long.

Diamond Burs  Spherical - 15 pcs. 4 x Ø 1,5 mm 4 x Ø 2,0 mm 3 x Ø 3,0 mm 2 x Ø 4,0 mm 2 x Ø 5,0 mm Ideal for Proxxon, Dremel and comparable machines.

Machinist Square Size ca.57x77mm

Universal holder/plier For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

Magnifying glasses with 3 glasses Magnifying: 1.5x, 2.5x, 3.5x

Drill Set 0.30 mm - 1.00 mm - HSS 15 HSS drills from 0.30mm increasing with 0.05mm till 1.00mm. Packed in pouch

Knife pen form 4 mm with 1 blade

Rivetting Hammer Steel Standard hammer

Needle files set 100mm mini - 5 pcs. Files are 100 mm long.

Ruler - metal - with stop Scale: mm and inch Reach: 15,2 cm / 6 inch

Professional Scalpel handle no.4 Swann Morton (without blade)

Steel Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Hand drill with spring - Large With extra collet For drills from 0.3-1.5mm

Saw help for tubes and rods

Machinist Square Size ca.68x102mm

Steel ruler 50cm, rigid First 10cm scaled with an additional 1 / 2mm division, Rear scaling in inches and provided with a hole for hanging.

Brass Brush for cleaning various surfaces

Center finder Dimensions 80x50mm For locating the center of round and square shapes. For example, the center of a bar stock

Drill Set 1.05 mm - 2.00 mm - HSS 15 HSS drills from 1.05mm increasing with 0.05mm till 2.00mm. Packed in pouch

Hand vice with wing nut 130 mm Flat clamp 11mm wide. For clamping small objects

Hand drill with spring For drills from 0.3-1,0mm

Machinist Square with stop Size ca.50x75mm

Fret saw set, fret saw set: fret saw table and G-clamp

Hand drill with spring Chrome For drills from 0.3-1,0mm