Sable brush, 3 sizes 0, 00 or 000

Bending springs for tubes For evenly bending brass, copper and tubes without kinking. Beforehand, the part of the tube to be bent must be softened by heating it with a flame. Then let the tube cool down. After cooling, the bending can begin. Method: S

Soldering Station 48 Watt, 160-480? Changeable Bit

Vice Deluxe Vice: Aluminium Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

DESK LAMP WITH MAGNIFYING GLASS - DAYLIGHT - 3 + 12 DIOPTRE - 12W - WHITE Features light source: 12 W circular fluorescent lamp on/off switch table standard dioptre: 3 + 12 Specifications dioptre: 3 + 12 (magnification 1.75 + 4.00) colour: white colour

Mini Locking Pliers Long or short Total Length 11-12cm

Drill set 2.35 mm Shank 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.3mm

Colle 21 Dense - anaerobic cyanoacrylate glue - 20 gram Dense: the thicker version of the normal Colle21. works better with porous materials. COLLE 21 is an ANAEROBIC glue, It works with pressure, which gives you the time to correctly position your asse

Sandpaper file 3 Variants: 120 Grid 180 Grid 240 Grid Single sanding belts also available

Diamond Burs  Spherical - 15 pcs. 4 x Ø 1,5 mm 4 x Ø 2,0 mm 3 x Ø 3,0 mm 2 x Ø 4,0 mm 2 x Ø 5,0 mm Ideal for Proxxon, Dremel and comparable machines.

Diamond tapered file set #120, #180, #300, #400 with Handle • 12-piece tapered diamond file set includes: - Grit 120: 6 mm, 4 mm, 2 mm flat file - Grit 180: 6 mm, 4 mm, 2 mm flat file - Grit 300: 6 mm, 4 mm, 2 mm flat file - Grit 400: 6 mm, 4 mm, 2 mm f

Nut File

Hammer with 6 changeable heads 1x Flat - Synthetic 1x Flat - Brass 1x Flat - Steel 1x Rivet - Steel 1x Ball - Steel 1x Round - Steel

Colle 21 Epoxy glue - 2 component glue. In handy tube for equal dosage. Mix the 2 parts together well. Sticks in 20-30 seconds. Full curing in a few hours. Widely applicable adhesive Good adhesive strength Waterproof Resistant to temperature changes Sui

Circlip pliers 2x 180º 1x 90º 1x 45º

Third hand base with magnifier For precision work for wich you'll need both hands and could use 1 extra. Very usable for soldering With (glas)magnifier ca. 60 mm, magifies 2.5x Completely adjustable.

Cutting Mat din A2 (600x450mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Third hand base with magnifier 90mm LED For precision work for wich you'll need both hands and could use 1 extra. Very usable for soldering With (glas)magnifier ca. 90 mm, magifies 2x with LED light Completely adjustable.

Magnifying glasses with 3 glasses Magnifying: 1.5x, 2.5x, 3.5x

Solder tin wire - 1mm 60/40 Rosin Core 17 gram

Rubber block For punching and cutting Size: 100x100x24 mm

Professional Scalpel Holder no. 5A (3) Swann Morton - Retractable Includes 5 blades 10A (Compatible with all blades that fit a standard no.3 holder) This scalpel holder is retractable, which provides extra safety when you are not using the blade.

Polishing wheel set - 4 pcs. 4 polishing wheels; 20mm diameter. 1x Thick Leather, 1x Thin Leather, 1x Fabric, 1x Sponge Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Bench hook with miter box The raised edge can be used as a stop for a workpiece. In the raised edges, 2 mini miter boxes are incorporated, these can be used with the middle and largest saw blade https://www.marks-miniatures.com/en/handsaw.html Material: