Hand Vice deluxe Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Mini clamp

Double hand drill / vice - US Model Length: ca. 9cm For drills from 0.3 - 3.0 mm with 2 double collets (=4 different sizes)

Parallel clamp 50mm Can apply pressure to your workpiece along its entire length, or aimed at a specific point. Total length of the jaw: 50mm - Usable jaw length: 20mm (the part of the jaw that is in front of the spindles) - Clamping range in the width:

Hobby Line Engraver for making panel lines (seams) in plastic

Spare soldering tip for Soldering Station D12-1 Choose from soldering tip: 1 Fine 2 Medium 3 Large

Nut File

Mini Wire stripper and cutter

Hand Vice Deluxe Mini Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Mini drill press vice / Machine vice Made from industrial plastic, solid construction. Rotating parts made of metal - Very little chance of damage to the workpiece due to plastic construction - Made in United Kingdom - Clamping Jaw width: 45 mm. - Cl

Bench hook with miter box The raised edge can be used as a stop for a workpiece. In the raised edges, 2 mini miter boxes are incorporated, these can be used with the middle and largest saw blade https://www.marks-miniatures.com/en/handsaw.html Material:

Mini Pipettes (7 pcs). Small pipetes, ideal for paints and fluids.

Cross Tweezer curved on stand - heat resistant Selfholding Tweezer. Hols small objects by itself

Xuron Wire Stripper Suitable for stripping electrical cables from 0.4 - 2.6mm Made in USA

Hobby Rivet Maker for making rivet impressions in plastic With 4 different blades. Spacing between tips from approx. 0.5mm (blade A) to 1.75mm (blade D)

Third hand base with magnifier 90mm For precision work for wich you'll need both hands and could use 1 extra. Very usable for soldering With (glas)magnifier ca. 90 mm, magifies 2x Completely adjustable.

Precision Cutter

spring clamp Maximum opening: 35 mm The clamp opens by squeezing. When released, the clamp closes automatically. Suitable for clamping different shapes. (round, square, triangle etc,)

Fret saw set, fret saw set: fret saw table and G-clamp

Mini Machinist Square Size ca.20x25mm

Universal holder/plier For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

Extra thin cement - plastic glue Glue for plastic scale model kits. Apply the glue to the parts and then hold them together. Capillary action causes the glue to draw between openings on its own. This glue dries completely within 10 minutes; comes in a 3

Steel ruler 50cm, rigid First 10cm scaled with an additional 1 / 2mm division, Rear scaling in inches and provided with a hole for hanging.

Hole Punch Set - 5 pcs Tool for making holes / disk out of sheet materials(plastic, paper, leather, metal sheet, etc.) Sizes: 3-4-5-6-8mm