Hand vice - opens rotated Vice: Steel Width of Jaws:15mm Handle: Wood Max. Opening: 10mm Hand vice opens the jaws when rotated Serrated haws with a vee Hollowed Handle to feed longer material trough the handle to the vice

Mini vise Jaw width 40mm Maximum opening: 30 mm Can be mounted on the table with the screw holes.

Double hand drill / vice - US Model Length: ca. 9cm For drills from 0.3 - 3.0 mm with 2 double collets (=4 different sizes)

Vice with ball joint. Due to the ball joint, the vice can be set in any desired position, which makes certain tasks easier. Jaw width: 78mm Max. opening: 55mm To be fixed with a table clamp on table tops up to 50mm thick.

Mini Glueclamp Max. opening 11cm can also clamp from the inside to the outside, see last picture

Mini drill press vice / Machine vice Manufactured from milled and ground steel - Very little chance of damage to workpiece due to smooth finish - Equipped with horizontal and vertical grooves for clamping round shapes. - Clamping Jaw width: 40 mm. -

Precision hand vice One side has a horizontal and vertical groove for clamping round materials. With sturdy wooden handle (hexagon) for good grip. Jaw width: 10mm Usable jaw depth: 18mm Max. Opening: 14mm

Vice Deluxe Vice: Aluminium Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

spring clamp Maximum opening: 35 mm The clamp opens by squeezing. When released, the clamp closes automatically. Suitable for clamping different shapes. (round, square, triangle etc,)

Hand Vice Deluxe Mini Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Hand Vice deluxe Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Hand drill / vice For drills from 0.3 - 1.0mm

Mini drill press vice / Machine vice Made from industrial plastic, solid construction. Rotating parts made of metal - Very little chance of damage to the workpiece due to plastic construction - Made in United Kingdom - Clamping Jaw width: 45 mm. - Cl

Vice deluxe - Large Vice: Aluminium Pins: 4 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Vice deluxe Vice: Aluminium Pins: 4 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:25mm Maximum opening between pins:30mm

Double hand drill / vice Length: ca. 9cm For drills from 0.3 - 2.4 mm with 2 double collets (=4 different sizes) with 2 double collets (=4 different sizes)

Mini Handvice Opening: 0.4-1.0 mm

Drill press vice 65mm Manufactured from high quality aluminum Width: 65mm Jaw height: 20mm Total height: 52 mm Dimensions without crank: 125 x 125 mm The holes fit exactly on our mini bench drill press: https://www.marks-miniatures.com/en/mini-bench

Hand vice with wing nut 130 mm Flat clamp 11mm wide. For clamping small objects

Handvice Opening: 0-1.0 mm