Watchmakers tap set Taps in the following sizes: M1 / M1,2 / M1,4 / M1,6 / M1,8 / M2 / M2.5 / M3 / M3.5 Holes should be pre-drilled 0.1-0.4mm smaller. Taps can be clamped in a (mini) tap wrench.

Watchmakers tap set Taps and die in the following sizes: 0,7mm / 0,8mm / 0,9mm / 1.0mm / 1.1mm / 1.2mm / 1.3mm / 1.4mm / 1.5mm / 1.6mm / 1.7mm / 1.8mm / 1.9mm / 2.0 mm Holes should be pre-drilled 0.1mm smaller. Taps can be clamped in a drill chuck, for ex

Watchmakers tap set Taps and die in the following sizes: 0.6mm / 0.7mm / 0.8mm / 0.9mm / 1.0mm Holes should be pre-drilled 0.1mm smaller. Taps can be clamped in a drill chuck, for example: https://www.marks-miniatures.com/en/hand-drill-with-chuck-and-rota

Tap Wrench Mini Square: 2,1-6,0mm Length approx. 11 cm

Colle 21 Thread Locking Agent - 50ml Prevents loosening of bolts and nuts caused by vibration. Prevention of rust and corrosion Removable: Can be removed with hand tools. Curing: 10 minutes and fully cured in 24 hours.

Tap Wrench M1-M10 M1-M10 Square: 2,1-8,0mm Lenght approx. 18 cm

Extra thin cement - plastic glue Glue for plastic scale model kits. Apply the glue to the parts and then hold them together. Capillary action causes the glue to draw between openings on its own. This glue dries completely within 10 minutes; comes in a 3

Extra thin cement - plastic glue - Blue The blue color provides extra visibility so that glue residues can be easily removed Glue for plastic scale model kits. Apply the glue to the parts and then hold them together. Capillary action causes the glue to