Center Punch Set 1/32 Inch 1/16 Inch 3/32 Inch

Steel Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Mini Punch Set 0.50mm 0.75mm 1.00mm 1.25mm

Scalpel handle no.7 narrow (without blade)

Hand drill / vice For drills from 0.3 - 1.0mm

Scriber used for marking metals and plastics. also usable as center punch

Hole Punch Set - 7 pcs Tool for making holes / disk out of sheet materials(plastic, paper, leather, metal sheet, etc.) Handpiece and hole punces in Sizes: 1,5 - 2,0 - 2,5 - 3,0 - 4,0 - 5,0 mm

Tap Wrench M1-M10 M1-M10 Square: 2,1-8,0mm Lenght approx. 18 cm

Vice deluxe Vice: Aluminium Pins: 4 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:25mm Maximum opening between pins:30mm

Hand drill with spring - Large With extra collet For drills from 0.3-1.5mm

Ruler - metal Scale: mm and inch Reach: 15,5 cm / 6 inch

Drill Set 1.05 mm - 2.00 mm - HSS 15 HSS drills from 1.05mm increasing with 0.05mm till 2.00mm. Packed in pouch

Tweezer support / holder clamp Adjustable support, for cross tweezers

Sandpaper file - 100/180 grit approx. 18cm long

Machinist Square Size ca.70x100mm

Sawblade for hobby knife #1

Brass brush set - 3 pcs. Straight brush Ø 5mm Disc brush Ø 22mm Cup Brush Ø 15mm Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Circular saw blade for wood and plastic. Diameter: 32mm Thickness: 0.3mm Fixing hole: 1.7mm

Mini Tube cutter / Pipe cutter 1.5-15mm To shorten copper and brass tubes / pipes. 

Hobby knife #1 with 1 blade Durable aluminium bitt. Good Quality

Machinist Square Size ca.57x77mm

Sandpaper file 100/180 grit curved Side 1: 100 grit Side 2: 180 grit 19mm wide 5mm thick with foam filling Approx. 18cm long.

Mini Tweezer curved 8cm - narrow tips With mini tweezers you can work closer to objects to have better control. Material: Stainless Steel Standard Quality

Drill set 2.35 mm shank- Cobalt Cobalt drills specially for hard steel alloys. e.g. V2A (Stainless Steel) 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.