Soldering Station 48 Watt, 160-480? Changeable Bit

Saw help for tubes and rods

Drill set 2.35 mm Shank 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.3mm

Bending springs for tubes For evenly bending brass, copper and tubes without kinking. Beforehand, the part of the tube to be bent must be softened by heating it with a flame. Then let the tube cool down. After cooling, the bending can begin. Method: S

Cutting Mat din A1 (900x600mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Curved files 10 pieces Set files, 10 pieces different shapes Ideal for hard to reach areas Length approx. 140 mm

Circular saws mini - 6pcs Ideal for Proxxon, Dremel, etc.

Watchmakers tap set Taps and die in the following sizes: 0,7mm / 0,8mm / 0,9mm / 1.0mm / 1.1mm / 1.2mm / 1.3mm / 1.4mm / 1.5mm / 1.6mm / 1.7mm / 1.8mm / 1.9mm / 2.0 mm Holes should be pre-drilled 0.1mm smaller. Taps can be clamped in a drill chuck, for ex

spring clamp Maximum opening: 35 mm The clamp opens by squeezing. When released, the clamp closes automatically. Suitable for clamping different shapes. (round, square, triangle etc,)

Reamer Conical 0-14mm

Solder tin wire - 1mm 60/40 Rosin Core 17 gram

Drill Set 0.30 - 1.60mm - HSS - titanium Titanium coated. Better for drilling metals, last longer. 20 HSS drills in sizes: 0.30-0.35-0.40-0.45-0.50-0.55-0.60-0.65-0.70-0.75-0.80-0.85-0.90-0.95-1.00-1.20-1.30-1.40-1.50-1.60 Packed in plastic...

Drill Set 0.30 mm - 1.00 mm - HSS 15 HSS drills from 0.30mm increasing with 0.05mm till 1.00mm. Packed in pouch

Mini Anvil

Universal holder/plier For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

Drill Set 1.05 mm - 2.00 mm - HSS 15 HSS drills from 1.05mm increasing with 0.05mm till 2.00mm. Packed in pouch

Hand Vice deluxe Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Hobby Rivet Maker for making rivet impressions in plastic With 4 different blades. Spacing between tips from approx. 0.5mm (blade A) to 1.75mm (blade D)

Brass Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Professional Scalpel Holder no.3 Swann Morton - Retractable Includes 5 blades 10A (Compatible with all blades that fit a standard no.3 holder) This scalpel holder is retractable, which provides extra safety when you are not using the blade. Co

Hand Vice Deluxe Mini Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Cross Tweezer curved on stand - heat resistant Selfholding Tweezer. Hols small objects by itself

Syringes - 2pcs. To applicate liquids like glue, paint, etc. Packed per 2: 1x2ml 1x5ml

Needle files set 100mm mini - 5 pcs. Files are 100 mm long.