Spare soldering tip for Soldering Station D12-1 Choose from soldering tip: 1 Fine 2 Medium 3 Large

Needle nose pliers bent fine

Cross Tweezer curved on stand - heat resistant Selfholding Tweezer. Hols small objects by itself

Mini drill press vice / Machine vice Manufactured from milled and ground steel - Very little chance of damage to workpiece due to smooth finish - Equipped with horizontal and vertical grooves for clamping round shapes. - Clamping Jaw width: 40 mm. -

Universal holder/plier For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

Bending tool 1.5-5.0mm For bending and forming from wire and metal strips/pieced(photo etch). Due sepperate sizes, you are allowed to bend repeatly with the same curve Size:1.5/2.5/3.5/4.5/5.0 mm

Grip tool Holds small objects by itself

Watchmakers tap set Taps and die in the following sizes: 0.6mm / 0.7mm / 0.8mm / 0.9mm / 1.0mm Holes should be pre-drilled 0.1mm smaller. Taps can be clamped in a drill chuck, for example: https://www.marks-miniatures.com/en/hand-drill-with-chuck-and-rota

Cutting Mat din A1 (900x600mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Parallel clamp 50mm Can apply pressure to your workpiece along its entire length, or aimed at a specific point. Total length of the jaw: 50mm - Usable jaw length: 20mm (the part of the jaw that is in front of the spindles) - Clamping range in the width:

Polishing File - 1200/1400/1600 grit approx. 18cm long

Third hand base with magnifier 90mm For precision work for wich you'll need both hands and could use 1 extra. Very usable for soldering With (glas)magnifier ca. 90 mm, magifies 2x Completely adjustable.

Hole Punch Set - 5 pcs Tool for making holes / disk out of sheet materials(plastic, paper, leather, metal sheet, etc.) Sizes: 3-4-5-6-8mm

Cross Tweezer straight narrow Tips - Stainless Steel Selfholding Tweezer. Hols small objects by itself With straight narrow Tips under small angle Material: Stainless Steel Premium Quality

Scalpel handle no.3 - ergonomic handle The ergonomic handle provides more comfort and stability. (without blade)

Photo Etch Pencil Has a slightly sticky tip, to pick and place small parts without shooting away. If the tip is not sticky or sharp anymore it can be scharpened with a regular pencil sharpener.

Fret saw set, fret saw set: fret saw table and G-clamp

Needle files set 100mm mini - 10 pcs. Files are 100 mm long.

Drill Set 0.30 mm - 1.00 mm - HSS 15 HSS drills from 0.30mm increasing with 0.05mm till 1.00mm. Packed in pouch

Hand vice with wing nut 130 mm Flat clamp 11mm wide. For clamping small objects

Polishing wheel set - 4 pcs. 4 polishing wheels; 20mm diameter. 1x Thick Leather, 1x Thin Leather, 1x Fabric, 1x Sponge Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Hobby Rivet Maker for making rivet impressions in plastic With 4 different blades. Spacing between tips from approx. 0.5mm (blade A) to 1.75mm (blade D)

Bench hook with miter box The raised edge can be used as a stop for a workpiece. In the raised edges, 2 mini miter boxes are incorporated, these can be used with the middle and largest saw blade https://www.marks-miniatures.com/en/handsaw.html Material:

Saw help for tubes and rods