scraping-knife For scaping and deflash plastics and metals.

Hand drill with spring For drills from 0.3-1,0mm

scraper/knife with handle

Mini sanding drum set - 12 pcs. 5x sanding sleeve 80 grit Ø12.7mm + 1 holder 5x Sanding sleeve 80 grit Ø6.3mm +1 holder Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Saw and grinding disc holder with wide head Shaft thickness: 2.3mm (Standard size fits most machines such as Proxxon, dremel, etc.) Screw thicknes 1.7 mm With 8mm wide head for extra support of the saw blade / grinding disc

Hobby Line Engraver for making panel lines (seams) in plastic

Bench hook with miter box The raised edge can be used as a stop for a workpiece. In the raised edges, 2 mini miter boxes are incorporated, these can be used with the middle and largest saw blade https://www.marks-miniatures.com/en/handsaw.html Material:

Drill set 2.35 mm shank- Titanium Coated Titanium coated. Better for drilling metals, last longer. 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Tap Wrench Mini Square: 2,1-6,0mm Length approx. 11 cm

Cleaning sticks Ideal for cleaning airbrusch Package contains 10 pcs.

Machinist Square Size ca.50x75mm

Hammer Nylon/Brass Hammer with nylon and brass head

Brass Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Double hand drill / vice Length: ca. 9cm For drills from 0.3 - 2.4 mm with 2 double collets (=4 different sizes) with 2 double collets (=4 different sizes)

Solder tin wire - 0.6 mm, 100 gram 60/40 Rosin Core 100 gram

Mini Handvice Opening: 0.4-1.0 mm

Drill Set 0.30 - 1.60mm - HSS - titanium Titanium coated. Better for drilling metals, last longer. 20 HSS drills in sizes: 0.30-0.35-0.40-0.45-0.50-0.55-0.60-0.65-0.70-0.75-0.80-0.85-0.90-0.95-1.00-1.20-1.30-1.40-1.50-1.60 Packed in plastic...

Japan spatula set, 4 pieces, plastic Set with 4 flat spatulas with the widths 5cm, 8cm, 10cm, 12cm.

Tube cutter / Pipe cutter 3-22mm To shorten copper and brass tubes / pipes. 

spring clamp Maximum opening: 35 mm The clamp opens by squeezing. When released, the clamp closes automatically. Suitable for clamping different shapes. (round, square, triangle etc,)

Center Punch Set 1/32 Inch 1/16 Inch 3/32 Inch

18-piece grinding disc set. Resin bonded aluminum oxide discs for grinding, cutting and deburring. Can be used on metal, alloys, plastic, fiberglass and wood. To be used with Proxxon, Dremel and other grinder machines. Cutting disk is 0,6mm strong Content

Brass vice

Hand drill / vice For drills from 0.3 - 1.0mm