Glass fibre cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Vice deluxe Vice: Aluminium Pins: 4 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:25mm Maximum opening between pins:30mm

Spring divider small For circles up to 16cm

Spring divider mid size For circles up to 19cm

Hand drill / vice For drills from 0.3 - 1.0mm

Hand drill with spring - Large With extra collet For drills from 0.3-1.5mm

Ruler - metal Scale: mm and inch Reach: 15,5 cm / 6 inch

Machinist Square Size ca.57x77mm

Scalpel handle no.3 (without blade)

Universal holder/plier For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

Scalpel handle no.3 - ergonomic handle The ergonomic handle provides more comfort and stability. (without blade)

Tin snips - self opening To cur thin metal sheets and photo etch.

Tin snips To cur thin metal sheets and photo etch.

Bending tool 6.0-10.0mm For bending and forming from wire and metal strips/pieced(photo etch). Due sepperate sizes, you are allowed to bend repeatly with the same curve Size:6.0/7.0/8.0/9.0/10.0 mm

Bending tool 1.5-5.0mm For bending and forming from wire and metal strips/pieced(photo etch). Due sepperate sizes, you are allowed to bend repeatly with the same curve Size:1.5/2.5/3.5/4.5/5.0 mm

Drill Set 1.05 mm - 2.00 mm - HSS 15 HSS drills from 1.05mm increasing with 0.05mm till 2.00mm. Packed in pouch

Drill Set 0.30 mm - 1.00 mm - HSS 15 HSS drills from 0.30mm increasing with 0.05mm till 1.00mm. Packed in pouch

Hand vice - opens rotated Vice: Steel Width of Jaws:15mm Handle: Wood Max. Opening: 10mm Hand vice opens the jaws when rotated Serrated haws with a vee Hollowed Handle to feed longer material trough the handle to the vice

Hand Vice deluxe Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Double hand drill / vice - US Model Length: ca. 9cm For drills from 0.3 - 3.0 mm with 2 double collets (=4 different sizes)

Double hand drill / vice Length: ca. 9cm For drills from 0.3 - 2.4 mm with 2 double collets (=4 different sizes) with 2 double collets (=4 different sizes)

Hand drill with rotating base Length: ca. 9cm For drills from 0.3 - 3.0 mm with 2 double collets (=4 different sizes) When drilling, the other collet is stored inside the shaft.

Hand vice with wing nut 130 mm Flat clamp 11mm wide. For clamping small objects

Scriber used for marking metals and plastics. also usable as center punch